track fasteners are a common occurrence, but when a problem does occur, it is important to find the cause of the failure as quickly as possible and to deal with it quickly. The following railway track fasteners manufacturer Linzhou City Railway track fasteners summarized the following points, I hope to help you!

Once you receive the track fasteners, you should immediately take the emergency tools to the track fasteners, and carefully check the switch department. First check whether there are bolts and other debris in the switch rail; Furthermore, check whether there is a problem with the tip of the switch rail.

If bolts or other dropped points are found in the switch department, use a crowbar to remove them in time, and lift the front joint of the sharp rail immediately. If the heel end of the sharp rail is pothole, it is necessary to level the heel end of the sharp rail. Under special conditions, one person can also stand on the tip bar of the switch rail, hold a track hammer, notify the station duty officer to pull the track fasteners, and hit the bottom of the switch rail with the track hammer to force the switch rail to lock while the switch rail is attached to the basic rail.

Replacing the damaged switch rail is a more common work in the public works department, and the replacement methods are also various. However, how to ensure the safety and smooth operation in the process of replacing the switch rail is the subject that the public works personnel need to study, and prepare three sleepers in advance; The length of the sleeper head should be between the two sliding plates of the same turnout pillow; When blocking, place three sleepers on the middle of the switch at first distance; Pull out the damaged switch rail on the sleeper head, and pull out the damaged switch rail outside the switch part. Then pull in the new switch and install it.

track fasteners https://www.hbrailwayfastening.com/