waterproof dc motor wholesale All transmission devices can be divided into three parts: input part, deceleration part, output part.

Installation steps:

1, check whether the two cycloidal wheels are a pair, the production of cycloidal wheels is a pair of units, that is to say, the two pieces of cycloidal wheels are not separated in the production process. When installed, the concept of a pair is that two cycloidal wheels can fully coincide. Including bearing holes, ten holes (shaft pin holes) and external tooth shape at the same time for safety coincidence, front view is a piece, if it can coincide, prove that it is a pair, can not coincide, prove that it is not a pair, can not be used. Note that cycloidal wheels are positive and negative, and there are marks on the cycloidal wheels, and the marks on each pair of cycloidal wheels are different.

2. Rotate one piece of the cycloidal wheel 180°, that is, when the middle bearing hole is completely coincided, the external tooth shape is just misaligned, and the tooth position of the upper piece is just the tooth tip position of the lower piece. Note that the relative position of the two wheels must be remembered, it is best to draw the mark yourself, or remember the original mark on the wheel. (This is a cycloidal wheel with a single tooth difference, and a double-tooth difference does not need 180°).

3, put a cycloidal wheel into the needle tooth shell, first turn by hand to see whether smooth, whether swing.

4, put into the eccentric bearing, because the bearing hole of waterproof dc motor wholesale is equivalent to the jacket of the eccentric bearing, so the correct position of the eccentric bearing is the bearing hole of the lower plate cycloid wheel just completely contains the cylindrical ball of the eccentric bearing.

5. Put in the spacer ring.

6, and then put another cycloidal wheel, put this wheel is the key. The position should be completely based on the last mark you drew.

7, put on the shaft sleeve, to turn by hand, to see if it can be turned, check whether the installation is correct.

waterproof dc motor wholesale https://www.dydzmotor.com/45mm-waterproof-pmdc-motor.html