3 stage spur gear gearbox wholesale is a wide range of industrial products, can reduce the speed of the motor, while increasing the output torque, can be used as supporting parts for lifting, mining, transportation, construction and other industries.

1, 3 stage spur gear gearbox wholesale press before starting to check whether the oil level in the reducer meets the requirements. Open or change the ventilation cap according to the prompt to make the ventilation smooth, and check whether the rotation is flexible.

2. Before the load test, it is necessary to run no-load for about half an hour, and the force can be loaded and run after confirming that there is no fault in no-load. The test machine should always check the operation: there should be no abnormal impact, vibration, no seepage, oil leakage. Temperature rise shall not exceed 60 ° C, high oil temperature shall not exceed 100 ° C (daily work should also be checked) all normal before formal work.

3, the work found 3 stage spur gear gearbox wholesale abnormal situation should be stopped for inspection, identify, troubleshoot before continuing to work. Check the lubrication condition often, pay attention to the amount of oil, and replace the deteriorated lubricating oil in time.

4, if there is a change in installation orientation. Under normal circumstances, replace the oil mirror, oil plug, ventilation cap can be.

5, gear reducer should be kept clean. Dust should not accumulate on the outer surface to prevent heat dissipation.

6, storage: 3 stage spur gear gearbox wholesale to be stored in a dry, ventilated, room temperature environment. When the storage period exceeds three months, it should be treated with rust prevention. When the machine is placed for about a year, it is necessary to check whether the oil seal is aging and whether the oil is deteriorating.

3 stage spur gear gearbox wholesale https://www.dydzmotor.com/spur-gearbox