It's a little more complicated, but with the correct method, it is feasible to connect your Lorex doorbell to WiFi without using the Lorex app. This approach is especially useful if you don't want to use mobile apps or are configuring the device on a network that is restricted.
Methodical Procedure:
Prior to doing anything else, make sure the Lorex doorbell is powered on. It should be powered by a suitable power adapter or connected to your current doorbell wiring.
Configuration mode can be accessed by holding down the reset button or by turning on the majority of Lorex doorbells. Usually, an LED indication will blink to show that device is in setup mode.
Connect via Web Interface: A local web setup page is accessible from some Lorex models. To employ this:
- Look for new wireless networks on your PC or mobile device.
- Join the temporary network of the Lorex doorbell (such as "LOREX_SETUP").
- Go to an IP address such as 192.168.1.1 in a browser (see the user manual for details).
- Enter the default login information, which is frequently located on the device label or in the handbook.
- Enter your home WiFi SSID and password after navigating to the WiFi settings.
- After saving the settings, let the doorbell reboot and establish a network connection.
Verify Connection: The doorbell ought to establish a connection with your household WiFi after rebooting. To make sure the device is connected, use the admin page on your router.
Access via PC Software (Optional): Instead than relying on the mobile app, you can monitor and adjust settings using Lorex's PC software, such as Lorex Home Center or Lorex Cloud Client.
Web-based configuration is not supported by all Lorex doorbell camera. To confirm compatibility, consult the handbook or support page for your particular model.
This manual method allows you to effectively integrate your Lorex doorbell into your home network without the need for app-based configuration.
